Hastelloy C276 vs Inconel 625, differences and comparisons.

Shanghai Lion Metal Co., Ltd. Nickel-based Alloy Division

Hastelloy C276 vs Inconel 625: A Comprehensive Comparison

Introduction

Hastelloy C276 and Inconel 625 are both high-performance nickel-based alloys that exhibit excellent corrosion resistance properties in a wide range of aggressive environments. Each alloy has distinct advantages and is tailored for specific applications where resistance to corrosion, high temperatures, and mechanical strength are critical. This article provides an in-depth comparison of Hastelloy C276 and Inconel 625 across various performance components, including corrosion resistance, mechanical properties, temperature resistance, weldability, applications, and cost.

Overview of Hastelloy C276 and Inconel 625

  • Hastelloy C276:
  • Composition: Nickel, molybdenum, chromium, iron, tungsten
  • Excellent corrosion resistance in oxidizing and reducing environments
  • High resistance to pitting and crevice corrosion
  • Superior resistance to chloride-induced stress corrosion cracking (SCC)
  • Good mechanical properties at high temperatures
  • Inconel 625:
  • Composition: Nickel, chromium, molybdenum, niobium, iron
  • Excellent resistance to a wide range of corrosive environments
  • Particularly strong resistance to crevice and pitting corrosion
  • Good strength and oxidation resistance at elevated temperatures
  • Retains its mechanical properties over a broad temperature range

Performance Comparison

The following table summarizes the performance characteristics of Hastelloy C276 and Inconel 625:

Performance ComponentHastelloy C276Inconel 625
Corrosion ResistanceExcellent in oxidizing and reducing environmentsExcellent in various corrosive environments
Superior resistance to chloride-induced SCCStrong resistance to crevice and pitting corrosion
Temperature ResistanceUp to about 1040°C (1900°F)Up to about 980°C (1800°F)
Mechanical PropertiesHigh strength and toughness at high temperaturesGood tensile, fatigue, and creep-rupture strengths
Maintains ductility after prolonged high tempRetains mechanical properties over wide temp range
WeldabilityRequires careful welding practicesGood weldability with conventional techniques
ApplicationsChemical processing, pulp and paper, waste treatAerospace, marine, nuclear reactors
CostHigher cost due to superior corrosion resistanceMore economical compared to Hastelloy C276

Detailed Analysis

Corrosion Resistance

  • Hastelloy C276: Known for its exceptional resistance to a wide range of corrosive environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.
  • Inconel 625: Offers excellent resistance to chloride-ion stress-corrosion cracking, high strength and toughness, and resistance to mineral acids.

Temperature Resistance

  • Hastelloy C276: Capable of being used in service temperatures up to 1900°F (1040°C).
  • Inconel 625: Suitable for high-temperature applications up to 1800°F (980°C) due to its high mechanical strength.

Mechanical Properties

  • Hastelloy C276: High strength and toughness across a broad range of temperatures, maintaining ductility after prolonged exposure to high temperatures.
  • Inconel 625: Good tensile, fatigue, and creep-rupture strengths at both room and elevated temperatures, with consistent mechanical properties.

Weldability

  • Hastelloy C276: Requires careful attention to welding procedures and heat treatment to avoid corrosion and maintain its properties.
  • Inconel 625: Exhibits good weldability using conventional welding techniques, with minimal heat-affected zone cracking when proper welding practices are followed.

Applications

  • Hastelloy C276: Widely used in chemical processing, pollution control, pulp and paper production, waste treatment, and sour gas wells.
  • Inconel 625: Found in aerospace, marine, and nuclear applications due to its high strength, oxidation resistance, and excellent weldability.

Cost

  • Hastelloy C276: Generally more expensive than Inconel 625 due to its superior corrosion resistance and broader applicability in severe environments.
  • Inconel 625: More cost-effective, making it suitable for applications where the highest corrosion resistance of Hastelloy C276 is not required.

Conclusion

In summary, both Hastelloy C276 and Inconel 625 are highly versatile alloys with distinct advantages depending on the specific application requirements. Hastelloy C276 excels in corrosive environments involving strong oxidizers and reducing agents, while Inconel 625 offers excellent corrosion resistance, mechanical properties, and cost-effectiveness in less severe conditions. The choice between these alloys hinges on factors such as the nature of the environment, temperature requirements, mechanical strength, weldability considerations, and budget constraints. Understanding these differences allows for informed decisions when selecting the appropriate alloy for critical applications.