Product Specification: LION® R30900 (T-900 Type) Cobalt-Based Alloy
LION® R30900 is a premium cobalt-based super-alloy specifically engineered for applications demanding extreme wear resistance. It belongs to the high-performance family of alloys that utilize a hard, intermetallic fase de lava (formed by Molybdenum and Silicon) dispersed within a tough cobalt-chromium-nickel matrix. This unique microstructure ensures exceptional performance in high-load, non-lubricated, and highly corrosive environments.
1. Key Performance Advantages
- Superior Galling Resistance: The Laves phase provides a low-coefficient of friction and prevents metal-to-metal welding (galling) or scoring even under extreme contact pressure.
- High-Temperature Red Hardness: Unlike many stainless steels, LION® R30900 maintains its significant mechanical strength and hardness at temperatures reaching 870°C (1600°F).
- Enhanced Fracture Toughness: Specially formulated with an optimized Níquel (Ni) content (approx. 16%), it offers significantly better crack resistance and weldability compared to traditional T-800 series alloys.
- Oxidation & Corrosion Resistance: Provides excellent chemical stability in aggressive media, including organic acids, and remains highly resistant to oxidation in hot air atmospheres.
2. Especificaciones Técnicas (Composición Nominal)
| Elemento | Símbolo | Peso % |
|---|---|---|
| Cobalto | Co | Balance |
| Molibdeno | Mes | 21.0 – 24.5 |
| Cromo | cr | 17.0 – 19.0 |
| Níquel | En | 15.0 - 17.0 |
| Silicio | Y | 2.4 – 3.2 |
| Hierro | Fe | ≤ 3.0 |
| Carbón | C | ≤ 0.08 |
3. Physical & Mechanical Properties
- Dureza: 52 – 57 HRC (As-cast / Weld-overlay)
- Densidad: 8.65 g/cm³
- Rango de fusión: 1285°C – 1350°C (2350°F – 2465°F)
- Thermal Expansion: 11.5 x 10⁻⁶ / °C (at 20-500°C)
4. Primary Applications
LION® R30900 is the material of choice for critical components in the following sectors:
- Aeroespacial: Aircraft bleed air valves, turbine engine bushings, and high-temperature support vanes.
- Oil & Gas: High-pressure mechanical seal rings, pump shaft sleeves, and downhole tool wear parts.
- Generación de energía: Steam turbine valve seats, boiler feed pump components, and high-pressure steam seals.
- Automotor: Turbocharger internal wastegate components and high-performance exhaust valve train parts.
5. Fabrication & Machining Guidance
- Welding & Cladding: Highly recommended for PTA (arco transferido por plasma) y Laser Cladding. Due to the addition of Nickel, preheating requirements can be reduced to approximately 260°C (500°F).
- Mecanizado: Due to the hard intermetallic phases, rigid machine setups and carbide or ceramic tooling are required. Low cutting speeds and constant feed rates are essential to achieve a high-quality surface finish.
Referencia cruzada de la industria: UNS R30900 | Comparable Trade Grade: Tribaloy T-900 type.
Manufactured under LION® proprietary high-performance alloy standards.