Product Specification: LION® R30400 (T-400 Type) Cobalt-Based Alloy
LION® R30400 is the most versatile grade within the cobalt-based Tribaloy® family. Specifically designed for extreme environments, it utilizes a hard intermetallic Fase de Lavas (Mo, Si, Co) dispersed in a tough alloy matrix. This structure provides an exceptional balance of mechanical wear resistance, high-temperature strength, and oxidation resistance, making it the industry standard for severe-service components.
1. Principais vantagens de desempenho
- Exceptional Galling Resistance: The high molybdenum content creates a low-friction surface that resists metal-to-metal “welding” and scoring in non-lubricated conditions.
- Balanced Corrosion Resistance: Offers good stability in various corrosive media, including acids and salt spray, combined with reliable oxidation resistance.
- Wide Temperature Range: Maintains high strength and hardness from room temperature up to 800°C – 1000°C (1470°F – 1830°F).
- Improved Toughness: Among the high-molybdenum Tribaloy alloys, R30400 offers a better balance of ductility and hardness (51-58 HRC) compared to the harder R30800.
2. Especificações Técnicas (Composição Nominal)
| Elemento | Símbolo | % de peso (típico) |
|---|---|---|
| Cobalto | Co | 61.0 – 63.0% (Balance) |
| Molibdênio | Mo | 27.0 – 29.0% |
| Cromo | Cr | 7.5 – 10.0% |
| Silício | E | 2.2 – 3.0% |
| Ferro + Níquel | Quer + Tem | ≤ 3,0% |
| Carbono | C | ≤ 0,08% |
3. Physical & Mechanical Properties
- Dureza: 51 – 58 HRC (Room Temp)
- Densidade: 8.60 – 8.65 g/cm³
- Resistência à tracção: ~690 MPa (Typical)
- Faixa de fusão: 1285°C – 1350°C (2350°F – 2460°F)
4. Aplicações Industriais
LION® R30400 is widely used in automotive, aerospace, and general industrial sectors for components such as:
- Automotivo: Turbocharger components, high-performance valve train parts, and bushings.
- Processamento Químico: Pump components, valve internals, and seals exposed to abrasive slurries.
- Aviation: Support vanes, turbine engine seals, and bleed air valves.
- Nuclear & Power: High-pressure steam valve components and seat inserts.
5. Fabrication & Machining Guidance
- Soldagem: Suitable for PTA (arco transferido por plasma) and Laser Cladding. High preheat temperatures (approx. 500°C) are typically required to prevent thermal cracking during deposition.
- Usinagem: Difficult to machine due to the hard Laves phase. Best processed via EDM (usinagem por descarga elétrica) or grinding with specialized abrasive wheels.
Referência cruzada da indústria: UNS R30400 | Comparable Grade: Tribaloy® T-400.
Data verified against ASM International Alloy Digest and SAE Metallurgical standards.